Swap

If you have amateur radio equipment you want to sell, leave a comment below with complete details of the items, including contact information (e-mail address and/or telephone number) and the price if you wish.  If you have photographs of the equipment you would like to sell, email them with your complete listing to kfourko@gmail.com

For Sale -
..


15 May 2012 -

I have a GAP Titan DX for sale. It is hanging in my garage partially dis-assembled – counterpoise is broken down – rest intact. It needs a little TLC, but should not take much to get it back up and running – I have the manual. You pick up and break it on down as much as you need in order to transport back to your shack. $100. Located in West Wilson County on Old Hickory Lake.  Contact: Ralph, KI4KC at   reday@mac.com


29 March 2012 -

For sale @ Lebanon, TN – Astron RS70M Linear DC Supply 13.8vdc, 70 Amps (ICS) / 57 Amps continuous, with meters.  Used less than 90 minutes total and never under a full load.  It’s practically new.  Local sales only.  I will not ship (45 lbs).  $225. pickup at 37090 (Lebanon).  Contact Greg at k4ko@charter.net or call (six-one-five) 428-7799.


06 March 2012 -

Looks like I’m getting out of the HF business! No room for antennas and no time anymore. So…..

ICOM 746 w/mic
Astron R-35M power supply
Vectronics DL-650M dummy load
Delta 4 antenna switch
A hefty roll of RG8/U coax
Kent twin paddle keyer
2m J Pole antenna

They’re all in excellent shape. The power supply has a few scratches on the top.

Make me an offer I can’t refuse! I’m in Nashville and just north of the airport on Murfreesboro Pike. I just took some pictures today (3/6/12), so email me if you’d like to see them.

Mike, KC9BYZ
mdkovach@gmail.com
317.847.4556


20 August 2011 -

For Sale @ Smyrna, TN:
I’ve listed (below) the equipment ID numbers:

1. ICOM IC-7800, HF/6 TRANSCEIVER 200W

2. ICOM IC-SP20, EXT. SPKR 765/781/7800

3. ICOM PW1, HF/50 MHZ, ALL BAND, 1KW LINEAR AMPLIFIER

4. PALSTAR DLI500, DUMMY LOAD

5. ZERO-FIVE VERTICAL 43′ ANTENNA

6. AS – 200 – TUNER, 4:1 BALUN 5KW CW – 1.5 – 30 MHZ/b>

7. MFJ-557

8. MARCONI, SN 0237

9. VIBROPLEX, NO. 110S38

10. VIBROPLEX, NO. 110632

My Dad purchased these items from 06 – 09, from the original receipts, total cost is around $15,000.00 including the antenna installation. With it now 2011, not sure what a “Fair Market Value” would be, any help or advice would be Greatly appreciated.  Contact Alan Logan at:  air2awl@gmail.com


02 August 2011
-

For sale:  Info-Tech M-300C tri-mode microprocessor keyboard generates International Morse Code, Baudot and ASCII. There is TTL output for connection to the M-200E to monitor outgoing transmissions. The AFSK output is Mark at 2125 Hz and Space at 2295 (170 Hz shift) or 2975 (850 Hz shift). There is RTTY FSK isolated output for the FSK input to a transmitter or may also be used to key a printer loop circuit. Supported Baudot speeds are 60, 66, 75, 100 and 132 WPM. ASCII at 110 or 300 baud. There is a built-in RY and Quick Brown Fox generator. There is a 700 character running buffer and 11 message memories of 120 characters each.

Requires 115 VAC 50/60 Hz 15W. 14.25 x 4 x 12 inches 11 lbs. With Owner’s Manual.

Owner used it to run CW. Used. Good condition. Owner lives in Nashville but drives to Lebanon several times a month to play jazz at the Bull & Whistle. Happy to answer any questions. Photo available on request.

Contact: Wayne Renardson NZ4W at wayne.renardson@comcast.net


24 Mar 2011 – I have for sale:

  • 2591 Ten-Tech 2M handheld
  • homebrew 12v P/S variable voltage (heavy duty)
  • RG59U 150′ Coax cable
  • Viking phone patch

Contact: Ken Hughes, K4VIL at 615-444-5502 (home) or 615-627-6996 (cell)

  1. Wayne Renardson, NZ4W
    2 August 2011 at 08:44 | #1

    For sale: Info-Tech M-300C tri-mode microprocessor keyboard generates International Morse Code, Baudot and ASCII. There is TTL output for connection to the M-200E to monitor outgoing transmissions. The AFSK output is Mark at 2125 Hz and Space at 2295 (170 Hz shift) or 2975 (850 Hz shift). There is RTTY FSK isolated output for the FSK input to a transmitter or may also be used to key a printer loop circuit. Supported Baudot speeds are 60, 66, 75, 100 and 132 WPM. ASCII at 110 or 300 baud. There is a built-in RY and Quick Brown Fox generator. There is a 700 character runnig buffer and 11 message memories of 120 characters each.

    Requires 115 VAC 50/60 Hz 15W. 14.25 x 4 x 12 inches 11 lbs. With Owner’s Manual.

    Owner used it to run CW. Used. Good condition. Owner lives in Nashville but drives to Lebanon several times a month to play jazz at the Bull & Whistle. Happy to answer any questions. Photo available on request.

    Wayne Renardson .

  2. Mike Kovach
    6 March 2012 at 16:04 | #2

    Looks like I’m getting out of the HF business! No room for antennas and no time anymore. So…..

    ICOM 746 w/mic
    Astron R-35M power supply
    Vectronics DL-650M dummy load
    Delta 4 antenna switch
    A hefty roll of RG8/U coax
    Kent twin paddle keyer
    2m J Pole antenna

    They’re all in excellent shape. The power supply has a few scratches on the top.

    Make me an offer I can’t refuse! I’m in Nashville and just north of the airport on Murfreesboro Pike. I just took some pictures today (3/6/12), so email me if you’d like to see them.

    Mike, KC9BYZ
    mdkovach@gmail.com
    317.847.4556

  3. Ralph Day
    14 May 2012 at 14:48 | #3

    I have a GAP Titan DX for sale. It is hanging in my garage partially dis-assembled – counterpoise is broken down – rest intact. It needs a little TLC, but should not take much to get it back up and running – I have the manual. You pick up and break it on down as much as you need in order to transport back to your shack. $100. Located in West Wilson County on Old Hickory Lake.

    Ralph, KI4KC
    reday@mac.com

  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.